Check out some similar questions!
Water pressure 3/4" versus 1/2"
[ 3 Answers ]
Does it make sense to run 3/4" copper lines to our new shower. we are putting in a rainhead showerhead, 4 spa jets, handheld shower and wall shower head. these showheads are controlled by 2 moen 1/2" stacked valves. Each valve will control to 2 showerheads. We were thinking of running 3/4" to...
3/4" pex from well to pressure tank
[ 14 Answers ]
Hello, I just recently had a sticking pressure switch that eventually led to the well pump and pressure tank going bad per the well man. Well is from late 2004. We just installed a new tank, switch, gauge, and a new pump with a pump screen. The pump screen is the slotted type with thousands of...
Water well kicks in and then another pressure "pop"
[ 2 Answers ]
I have a 5 hp submersible which turns on @65 psi and off @85 psi. When it kicks on there's another "pop" a split second later which rattles the pipes outside the well housing. Any clues??
Running hot water alone leads to "thunk" and pressure loss
[ 1 Answers ]
For several months now, when we run the hot water in our bathroom faucet for about 30 seconds, we hear a "thunk," which is followed by about 50% pressure loss. If we turn the water off for a moment and back on, the thunk happens a few seconds in, and pressure loss occurs again. Recently, it began...
Water pressure "hiccups"
[ 1 Answers ]
About 3 months ago my kid took a shower when the power was out. We have a well that is 10 yrs old. I noticed a couple of months later that a spigot outside was left on but hooked to a garden hose with sray nozzle. Spigot has one of those "pressure relief collars" (don't kow what it is called). ... View more questions Search
Add your answer here.
|