Ask Experts Questions for FREE Help !
Ask
    laflor13's Avatar
    laflor13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 19, 2009, 10:21 PM
    Colman Evcon control board
    Please help on Coleman Evcon control board wiring diagram ,for new control board.

    It looks slightly different than original.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 20, 2009, 01:31 AM
    Exact part number for the old board ?

    Exact part number for the new board ?

    Exact model number for the furnace ?

    I figure it is a Coleman Evcon furnace but they made 3,267 different models which use many different controls so since my crystal ball is in the repair shop it is difficult to guess at which one you are talking about.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bad control board [ 13 Answers ]

We have an older Trane gas furnace (TUC series) and the control board went bad (model 50e47-060). The furnace would come on, but there was no signal to the ignitor per the technician who wanted to charge almost $1K to replace the control board. With money being so tight, we purchased a new board on...

Colman Evcon furnace burner shutting off [ 2 Answers ]

Hi... my model DGU08012UB is having an issue. The induction motor comes on,ignitor lights burner and the burner runs for 3-5 seconds and shuts down. The induction motor continues to run. The burner will not come on again. If I power it down,it repeats the cycle. I do not see any diagnostic error...

Coleman Evcon Ignition Control [ 3 Answers ]

New tech here. I work almost exclusively on RV's but got a call today to look at a furnace on a mobile home with a Coleman 7956-656 furnace. It has an Evocn 1474-004 Ignition Control box. When heat is requested at the thermostat, the blower runs and the glow plug glows hot but no 24v at the...

Control board [ 4 Answers ]

I'm working on a forced hot air furnace that's in a basement that got flooded and the furnace was only on 2-4 so it looks like the whole blower motor and control board transformer got flooded. I responded to a no heat call today check the unit the unit won't do nothing, it has power coming from...

Control board [ 1 Answers ]

My control board seems to not be working the light won't come on it is a goodman 90% furnace I do not have the home owners book for it

View more questions Search