Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Moisture between plywood and fiberglass insulation
[ 6 Answers ]
We rencently bought a home in Buffalo, NY, and there is an addition to it where the first floor used to be the garage and a new upstairs that is not finished at all. There is just plywood for the walls and floor, no siding, no heating. We installed insulation but noticed that frost would form...
Cathedral ceiling insulation
[ 3 Answers ]
G'day: I am winterizing our cottage and wish to preserve the interior appearance of the ceiling. Since our cedar shake roof is in need of replacement we are considering applying the insulation to the exterior prior to installing the new roofing material. I assume I will have to toenail new 2x4's or...
Ceiling Insulation
[ 1 Answers ]
Is it possible to safely add insulation and "create" a raw wood look with laminate planks to a vaulted ceiling?
Cathedral ceiling insulation
[ 4 Answers ]
Hi, I'm building a cabin in the woods up here in Alaska. This is my first time building something out of wood besides a tree fort. I'm a welder. Anyway my cabin dimension is 16' wide by 24' long with 10' walls. The roof pitch is 12x12 (heavy snow load). I built the roof with the idea of...
Putting plywood over attic insulation.
[ 2 Answers ]
We have an attached garage that is not heated. In the attic I am planning to put some cellulose insulation over the fiberglass stuff. Once this is done I would like to put some plywood down so we can store stuff up there. Should I leave small spaces between the plywood to keep condensation from... View more questions Search
|