Ask Experts Questions for FREE Help !
Ask
    hcooksey2's Avatar
    hcooksey2 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 17, 2009, 04:34 PM
    Rewiring my jd mower
    I need to find out how and which wires hook to my sylanoid for my older john deere riding mower model no c111j-144343m
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Sep 17, 2009, 05:39 PM

    Hi,
    Either this is a mower out 1960's or it is an unfamiliar number. Did this number come near the shifter or beneath the steering wheel on the pedestal it mounts to? What engine, numbers?
    Peace,
    Clarke
    hcooksey2's Avatar
    hcooksey2 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 18, 2009, 01:39 PM
    Numbers come from beneath steering wheel and engine model no. is 253707
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Sep 18, 2009, 02:06 PM

    Hi,
    Cannot get a schematic, but harness picture is below and is from:
    John Deere - Parts Catalog
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rewiring an old generator [ 8 Answers ]

I have an old 5KW generator with an L6-20 and a 5-20R duplex receptacle. From the generator itself there are two black and two white wires going to the distribution panel. Nominal voltage is 120 between black and white, and 240 between black and black. Inside the panel, the two black wires go...

Rewiring 12hp briggs lawn mower [ 2 Answers ]

I put a different 12hp briggs and stratton on my lawn mower. So I want to rewire it eliminating all of the old safety switches... It has electric start and lights... I know it can be done very easy.I just need a diagram... Thanks

Rewiring at breaker box [ 1 Answers ]

Hello, I am rewiring my house as part of a kitchen remodel. The wiring in my house in flexible conduit with multiple lines in the same conduit. I am using one of the lines in the conduit but not the other. Can I leave the wiring I will not be using in the conduit and disconnect the line at the...

Rewiring a thermostat [ 3 Answers ]

I want to move my existing thermostat just a few feet away from where it is now. My question regards the new thermostat wire. Is it okay to splice the new wire and the old wire, if it is okay, any suggestion on method of splicing?

Rewiring Hot Tub [ 3 Answers ]

I have a 220V cable coming to hot tub. 2 black wires a bare wire. Does it matter which black wire goes where. I know the bare wire would be ground, but I question 2 black wires. I thought 1 would be black and the other red.

View more questions Search