Amana dryer-heat start then turns off

Check out some similar questions!

Amana 80 SSE Heating - works for 5 seconds then turns off [ 2 Answers ]

I have an Amana 80 SSE heater. I read through the site and found out that I had no blinking series of lights - everything seems fine. I took an air can and cleaned out the flame sensor and it worked fine for a few days but now it is back to the same old problem - turns on and lights up for 5...

Kenmore Gas dryer heats for 5 mintes and turns off, then ignitor glows and turns off [ 0 Answers ]

When I start the dryer on any heat level and timed drying, everything turns on as usual. After 5 minutes the flames turns off and never comes back on. If I turn off the dryer and start it again, I hear a click and the igniter turns on, glows and turns off before the gas comes through, then glows...

Amana Dryer heat quits workint [ 2 Answers ]

My two year Amana dryer quits heating after a few minutes of drying. What is causing this problem?

Amana Gas Dryer won't heat on heat cycle [ 2 Answers ]

I have an Amana gas dryer about 10 years old. The dryer will heat and the timer will advance on the timer cycle but it will not heat on the heat/more heat cycle. I have cleaned the lint vent entirely. I can see the ignitor get red hot and then ignites the gas on the timed setting. I am not sure...

Kenmore Elite gas dryer has no heat turns off when start button is released [ 1 Answers ]

I have a Kenmore Elite gas dryer Model 11074992300. At first the dryer would run but there was no heat. Now the dryer will only run when the start button is pressed, as soon as it's released it stops running and still no heat. Does anyone know what it will need to be repaired?

View more questions Search

Check out some similar questions!

Add your answer here.