 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore 6651355 ultra wash reset
I can not tun on my dishwasher. I have tried reset by switching between high temp and heated dry until all lights illuminate and runs through each cycle briefly. I then attempt to run normal wash and no response. There must be a specific sequence. The owners manual is no help! Any thoughts on this
|
||||
Check out some similar questions!
We paid a Sears repairman to come out when we had a flashing "Clean" light on our dishwasher, A Kenmore Ultra Wash 665.1603 or 1703, and he gave us the diagnostic code (buttons to push on the operating panel) and we have used it again after that, but I cannot find the order of the buttons to push...
I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?
My dishwasher has been working fine until one day it just won't run a new cycle. The clean light is flashing and when I press the start button, the clean light proceeds to flash several times. Please help!:confused:
I have a Kenmore ultra washer and the water spinner that hooks on the upper chamber, where you put the dishes fell off. I tried to put it back on but was unable to. Is there a tool I need or do I need to get a repair man? Please let me know. Thank You
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
