Ask Experts Questions for FREE Help !
Ask
    cdjams's Avatar
    cdjams Posts: 6, Reputation: 1
    New Member
     
    #1

    Sep 12, 2009, 06:36 AM
    1992 Honda Accord - replacing O2 sensor
    Where is and how do I replace the O2 sensor on a 1992 Honda Accord EX?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Sep 12, 2009, 07:17 AM

    It's located in the exhaust manifold, between the radiator and the engine block. Look for a 4-wire pigtail coming out of the sensor. Here's how you can change the sensor yourself:

    https://www.askmehelpdesk.com/cars-t...tml#post223376

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1992 Honda Accord TDC Sensor [ 6 Answers ]

I have a 1992 Honda Accord LX 2.2L sedan with an annoying little problem. The check engine light is on and the motor will absolutely not rev past 3500RPM despite the fact that it should be able to hit 6500RPM during hard acceleration (passing cars, fast 0-60, etc.) and exceed 3500RPM at speeds...

1992 Honda Accord [ 2 Answers ]

My Accord won't turn over when the weather is hot or when driving it for period, parking and returning a short time later. (i.e. running into the store for 3 min). I heard it might be my main relay? Never a problem during cold weather.

My 1992 honda accord [ 16 Answers ]

I here the fuel pump when I turn the key on... but its been raining so I haven't had a chance to go further... but I don't smell gas when I try to start it over and over could it be the filter...

I have a 1992 honda accord and would like to put a 1996 honda accord engine and trans [ 2 Answers ]

I got a 1992 honda accord and would like to put a 1996 honda accord engine and trans in it. Would it be possibly.

Replacing Ignition in 1992 Honda Accord LX [ 2 Answers ]

I am trying to replace the ignition cylinder assembly in my 1992 Honda Accord LX, automatic. What is the trick to getting the old one out. I have the steering column disaasembled but I can't figure out how to actually remove the old cylinder. Any suggestios?


View more questions Search