Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting to 1 1/2" copper drain with pvc kitchen sink drain trap
[ 8 Answers ]
I'm trying to rehook up the kitchen sink pvc trap to the old copper drain pipe but the connector doesn't fit tight enough and the water links out. Any ideas how to stop this leak?
Can the UPS charge in pluged to power and switch off.
[ 1 Answers ]
I have a 500VA UPS. In our area power cut is very high. So to run the computer I installed a big battery in my UPS near about 64ah. In the day time the power shut down. So I use the battery. The power comes in the evening time. My question is that can the UPS charge the batter pluged into the power...
Vent for Washing Machine Drain Attached to Existing Drain Line
[ 0 Answers ]
"Current setup for a washing machine has the discharge hose "hooked" into a laundry tub. Tennants would like something more "permanent." The laundry tub has a normal trap followed by a horizontal run of about 2 feet (2" threaded pipe) then "T's" into a vertical drain/vent. The vent line goes...
Outgoing Drain Behind Vanity Cabinet Not Aligned with Sink Drain Tube in New Sinktop
[ 1 Answers ]
I'm installing a new vanity cabinet and new marble vanity top, both slightly larger than the originals. The problem we've encountered is that the drainage pipe that will exit sink water from the sink to the house -- the PVC pipe in the house/wall -- is not aligned with the new location of the sink... View more questions Search
|