Ask Experts Questions for FREE Help !
Ask
    ndsuddarth's Avatar
    ndsuddarth Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2009, 08:47 PM
    Whirlpool washer will not spin or release water
    I have a Whirlpool washer that will agitate the clothes but will not spin or release the water after the cycle. The acuator pin is still attached and the water is still in the washer. Not for sure what to do?

Check out some similar questions!

Whirlpool washer will not spin lsq9110kq1 [ 0 Answers ]

I have a whirlpool washer and it will not spin out the water.

Whirlpool washer won't spin [ 1 Answers ]

The washer tries to spin but only makes a loud rapid clicking sound. The motor coupler is OK. I replaced the clutch which was badly worn but no improvement. I am now trying to remove the basket following the Whirlpool manual but after removing the spanner nut the tub will not lift. I have tried...

Whirlpool Washer Spin [ 3 Answers ]

I have a whirlpool washer that will not go into final spin. You have to manual turn the tub clockwise about two turns, Re-set the switch to final spin, close the lib, then it will go into final spin. What is the problem or do I need to replace the switch. Thank YOu;

Why won't my whirlpool washer spin and drain the water? [ 1 Answers ]

My washer will wash but when it won't spin to drain out the water.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.