Ask Experts Questions for FREE Help !
Ask
    acft747's Avatar
    acft747 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 7, 2009, 06:28 PM
    EFI fuse keeps blowing 1993 toyota camry
    Where can I find the wire diagram for the inside of a engine control module for a 1993 toyota camry I have a short on the EFI fuse
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
     
    #2

    Sep 7, 2009, 06:43 PM

    Have you had any cylinder head or valve cover gaskets done recently? 4 Cyl motor?
    RickMN's Avatar
    RickMN Posts: 244, Reputation: 52
    Full Member
     
    #3

    Sep 7, 2009, 07:00 PM

    Try checking these items

    EFI fuse blows repeatedly on Toyota
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #4

    Sep 8, 2009, 05:26 PM
    Quote Originally Posted by acft747 View Post
    Where can I find the wire diagram for the inside of a engine control module for a 1993 toyota camry I have a short on the EFI fuse
    Inside the ECM?? :confused:
    Do you know what's all in there?? :eek:
    That's major electronics! Stay out of there if you can!

    Have you looked elsewhere for any kind of obvious short along the engine harness, etc.
    Look for loose, chaffed or chewed wiring. Sometimes, all you see is the black plastic conduit being chewed or chaffed, but damage may have gotten into the harness below.

    Did this fuse just start opening without other human interference? i.e.: some other repair and then the fuse began to open...
    More info, please...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1993 toyota camry won't start [ 9 Answers ]

Just bought the car,and was told the fuel pump was out. Put a new one on, but there's no power getting to it(tested with elec.tester) it also has no spark. It's a 4cyl. Le. And we have bought a repair manual for it, I just thought maybe someone on here might have some insight into similar problems...

1993 toyota camry won"t start [ 10 Answers ]

My 1993 toyota camry was running great and all of a sudden it just quit running. My preliminary test indicates that it is not getting spark to the plugs. How do I test the distributor, ignition coil, igniter, cap & rotor, etc. It is a 4 cylinder engine

My 1993 toyota camry won't start? [ 3 Answers ]

My camry will not engage the starter? I coulnt find a starter relay, or maybe I just don't know what relay controls it. The car will start if I turn the key on an touch the small lead on the starter with a 12+ jumper. The battery cranks the car over just fine which makes me think it's a relay, but...

1993 V6 Toyota Camry won't start [ 1 Answers ]

I just bought this car not running. It turns over fine, has fuel pressure if I jump B and FP at the diagnostic plug, has spark, has correct timing of cams and distributor, has voltage to the injectors, but I think it isn't getting the signal (pulsed ground) from the computer to tell the injectors...

1993 toyota camry won"t start [ 2 Answers ]

My 1993 toyota camry was running great and all of a sudden it just quit running. My preliminary test indicates that it is not getting spark to the plugs. How do I test the distributor, ignition coil, igniter, cap & rotor, etc.


View more questions Search