Ask Experts Questions for FREE Help !
Ask
    lkeith33's Avatar
    lkeith33 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 1, 2009, 03:42 PM
    Kenmore Series 90 washer
    I have a Kenmore Series 90 washer that worked fine until yesterday - is now full of water, it agitates, but does not move onto the spin cycle and drain - has anyone had this problem - help!
    Gem_22205's Avatar
    Gem_22205 Posts: 976, Reputation: 129
    Senior Member
    		  
    #2

    Sep 1, 2009, 04:29 PM
    This sounds as if it could be due to a defective lid switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the capacity of my Kenmore 80 Series Washer & 90 Series Dryer? [ 1 Answers ]

We are trying to figure out what the capacity is of our Kenmore Washer and Dryer that we purchased over 10 years ago in Canada. I can't find it anywhere on the machine or manual. The Model # of the Kenmore 80 Series Super Capacity Plus Washer is 110.4784292, Serial #CH0802766. The model # of the...

Kenmore washer 80 series [ 3 Answers ]

I posted a question about a leak coming from underneath my washer. Possibly the water pump or hoses. Does anyone know or can send me a diagram of how to open the top lid and/or remove the cabinet sides so I can do the inspection. Short of just flipping the machine on its side to work on it.

Kenmore 80 series washer [ 5 Answers ]

It stopped agitating and spinning? I am broke so I will try to fix myself so what should I do first to troubleshoot it?

Kenmore series 70 washer [ 1 Answers ]

I have a Kenmore series 70 washer that will not agitate. I have searched and everything says to remove to bolt in the agitator and then remove the agitator. My problem is that the bolt will not loosen or tighten. If I put my socket on the bolt and then turn the machine on to agitate, it moves...

View more questions Search