Ask Experts Questions for FREE Help !
Ask
    glyndrewe's Avatar
    glyndrewe Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 1, 2009, 09:28 AM
    Concrete patios laid, incorrectly, without expansion joints.
    I have recently employed a 'Concrete Specialist Firm' to lay my patios around three sides of my lounge. I gave them a drawing of how I visualised the finished result and they quoted and have now done the job. In the month since that has been laid everyone who comes here comments on the fact that it is such a huge area and has no expansion joints and it buts right up to the concrete foundations of the house. I have asked the contractor and he says that with the new fibre mesh technology it is not necessary to have joints. This I excepted as he is the expert, but now cracks have started to appear from the corners of the house. He says they are not cracks they are fractures and to be expected. He says he does not guarantee against cracks!

    I have written to your team here and asked if fibre mesh concrete needs to have expansion joints and they say that they absolutely must have.

    How do I stand legally? This is a fairly large company with contracts from the local council etc.

    Thanking you for any advice.
    excon's Avatar
    excon Posts: 21,482, Reputation: 2992
    Uber Member
     
    #2

    Sep 2, 2009, 05:59 AM
    Hello g:

    Hire ANOTHER concrete expert. If HE tells you the job was done wrong, hire him to fix it right, and sue the other guy for what it cost you.

    excon

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there need for expansion joints in fibre mesh concete [ 3 Answers ]

I am having a patio built around 3 sides of the lounge which is 7 x 9 meters. The patio goes out to 7meters on the two opposite sides of the lounge and 4.5m on the joining 3rd side. My builder tells me that it is not necessary to have expansion joints with fibre mesh concrete, but I am...

Concrete cold joints [ 1 Answers ]

The method of rectify concrete cold joints

Replace Wooden Expansion Joints on Patio [ 2 Answers ]

I have a 25 year old concrete patio that has several 2"X2" redwood expansion joints in it. These joints are now warping and are causing a safety hazard. Is there any polyurethane material that could be used to replace the redwood expansion joints? What would you suggest? I live in the Mission...

Need answer for concrete patio slope/expansion joints [ 3 Answers ]

Hello. I am pouring a 18" stamped border around a patio. Most of it is covered and protected from the rain. The width of it is mostly 10' with a section that extends approximately 10X15', My question is the border completely forms around the middle patio section; therefore, sort "enclosing" this...

Patio Expansion Joints [ 3 Answers ]

I am installing a patio in my back yard and want to know how I put the expansion joints on existing contrete. Do I need to glue them on, or buy something else, or what? Thanks.


View more questions Search