Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower diverter leaks into tub when turned to shower
[ 2 Answers ]
I'm trying to replace my shower diverter valve since it leaks into the tub significantly when turned to the shower. It's a 3-knob system (hot, diverter, cold) and I don't know the brand. I've gotten the knob off, the surrounding piece off, and one nut off, but I'm not sure what to take off next...
Shower Diverter
[ 37 Answers ]
Please excuse me if I don't have the terminology right. I have a Grohe shower set. The diverter is located on the end of the tub spout. The shower diverter doesn't seem to be working right. I have three problems: The diverter doesn't return to the tub spout when the water is turned...
Shower diverter @ 50%
[ 1 Answers ]
I replaced the leaky diverter in the shower, now I have about 50% of the water coming from the shower and the other 50% coming from the spout. What could the problem be?
Shower diverter
[ 1 Answers ]
Jayhawk New Member Join Date: Mar 2006 Speedball: I did as you suggested, took out the valves and flushed the shower mixer/diverter. Pressure was very good and some of the lime and calcium came out. I cleaned up the valves with vinegar and put them back in place. Turned on the water and...
Shower diverter?
[ 6 Answers ]
When I turn on the water, then go to turn the faucet (wall type diverter with spring) for the shower, the water still comes out of the spout and just about half of the water comes out of the shower head. I have already replaced the diverter with a new one (much stronger spring as the old spring was... View more questions Search
|