Ask Experts Questions for FREE Help !
Ask
    velvet911's Avatar
    velvet911 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2009, 12:01 PM
    Monen facuet, no hot water
    New house, monen facuet in lower bathroom has cold water going through it but no water coming out when you turn the lever over to the hot side. Sink beside shower has good hot and cold water. No other issues throughout 3 bath home.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 30, 2009, 03:17 PM
    Shut vthe water off to then valve, open the faucet up and remove the cartridge. Check and clear the inlet ports on the cartridge. Before you button up turn on the hot water to flush out the supply and open valve. Good luck, Tom
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #3

    Aug 30, 2009, 03:45 PM

    What is the model number of your faucet?

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leaking Facuet [ 1 Answers ]

When I turn on my shower water pours out my facuet too. Whar do I do Please help.

My bathtub facuet is leaking [ 3 Answers ]

My bathtub faucet is leaking. I do not know what type of manufacturer made the faucet. A plumber wants to charge me to remove the tile and replace all the plumbing work, but he never really tried to determine what type of faucet it is. Is this necessary to do this work or can I remove the steam...

Outdoor Facuet [ 1 Answers ]

When a hose is attached to the outside faucet and the water is turned on, water spews and runs from under the light grey plastic cap on top of the faucet. The cap has "Antisiphon" on it and from what I understand, this plastic cap is a part of the vacuum breaker. When I try to remove the cap, it...

Leaky shower facuet [ 5 Answers ]

My shower had a very huge leak problem. After doing some research I found that replacing the washer or the stem would be the best solution. I took out my cold stem and saw that it was completely corroded so I replaced it. I took the stem to the hardware store and a employee help me find the...

View more questions Search