 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lossin water pressure
I just had a new water boiler installed in my house.I have oil hot water with the old raditors in the house.to install furnace my whole system was drained,now after a couple off minutes running shower loss all water pressure upstairs for shower and sink,wait about 5 minutes and pressure comes back.this has been going on for 3 days know any ideas
|
||||
Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Cold water pressure is lower than Hotwater pressure
[ 1 Answers ]
In the bathroom sink, I see the hotwater pressure is very good . When I open the cold water it is very low. It is was fine 2 weeks ago. What could be the problem? Thanks Asaad
Low water pressure causing high blood pressure
[ 1 Answers ]
I have low or no hot water pressure to the downstairs bathroom. I've replaced the cartridges, valves and hot water heater, still no pressure... help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
