Ask Experts Questions for FREE Help !
Ask
    marc lantz's Avatar
    marc lantz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 29, 2009, 11:20 AM
    How to bid a dry wall job
    I am starting a buissness and need to know how to bid a dry wall job? Is it by the sheet, or by the sq. and what is the average price
    arby808's Avatar
    arby808 Posts: 110, Reputation: 4
    Junior Member
    		  
    #2

    Aug 29, 2009, 12:40 PM

    Let me get this straight you are starting a drywall company and you don't know how to bid the job? Hmmm. I own a drywall co and I bid jobs off blueprints I know exactly how many sheets of rock go into the job know how much mud, tape ,bead I need I know what the codes are in my area for fire stops. What area are you from prices vary from one area to another
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running in wall Coaxial Cable from Existing wall [ 7 Answers ]

Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...

How to support a load bearing wall, need engineer, cement wall [ 3 Answers ]

I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...

Pouring a concrete wall in front of a damaged cinder block wall [ 1 Answers ]

I need to repair a well house that has buckling cinder block walls. The well is below ground with a shed above it. The room is approximately 9' x 8' and 8' tall with cinder block walls and a concrete floor. The block did not have concrete poured in it when it was built, the blocks are beginning...

Installing wall remote for ceiling fan into wall switch [ 3 Answers ]

I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the...

Hampton bay fan came with wall remote but Fan is not operated from a wall switch. [ 1 Answers ]

I received a New Hampton Bay fan to replace an existing fan. The existing fan is operated by two pull chains. The new fan came with a wall control device. The problem is that the fan is not operated from the wall switch and there are no pull chains. Can I use a Hampton Bay remote with the...

View more questions Search