Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How I fixed my RTH230B 'blue wire'
[ 5 Answers ]
Hi All, This seems like the hottest place for Honeywell RTH230B questions, so I thought I would post what worked for me after much reading on this forum and troubleshooting. My old thermostat had five wires: read, white, yellow, green, blue The Honeywell connections for: Rh, Rc, W, Y, G ...
What is the blue 12awg wire attached to in the box?
[ 6 Answers ]
I have a hot tub with 4 wires coming from the hot tub controls to be attached to the shut off box 8 feet away. Two wires, one blue, one red are 10awg, apparently 110volts each incoming. Two additional wires, one blue, one red are 12awg and would appear to be for the second cirucuit, with a 15 amp...
X1 Wire, blue
[ 1 Answers ]
:confused: Hello, I am trying to change out my themostat, I have a white-rodgers 1F58W-72, and I can tie all the wires ecept for a "X1" wire, which I don't know what it will transfer to. I have the these ready to put on my new digital thermostat, Y, W2, R, O, B, G; but nothing for the blue X1...
Blue wire on a carrier AC 38CKC060300
[ 2 Answers ]
The fan on my A/C unit stopped working. Sometimes it will start and run for a few minutes and then stop another time it just doesn't start, it tries to start but doesn't seem to have enough torque to start, even if I turn it it still doesn't continue but it tries. I purchased a replacement...
Loose Blue Wire
[ 1 Answers ]
I need some help finding out where this loose wire should go. We have a 9 year old house and lennox gas furnace 80MGF series. Were not getting heat, it has a slow flash(no call for heat)on the LED code. The emergency heat will ignight the burners and we can get heat that way, but I don't want to... View more questions Search
|