Ask Experts Questions for FREE Help !
Ask
    jtaylor519's Avatar
    jtaylor519 Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Aug 26, 2009, 11:12 AM
    Making frosting
    Hi when making homemade buttercream frosting or any frosting and using a stand mixer do I use the paddle attachment or the whip

    Thanks for any help
    MsMewiththat's Avatar
    MsMewiththat Posts: 854, Reputation: 136
    Senior Member
    		  
    #2

    Aug 26, 2009, 12:01 PM

    I would use the whip. Not so much a folding process.
    Just Dahlia's Avatar
    Just Dahlia Posts: 2,155, Reputation: 445
    Ultra Member
    		  
    #3

    Aug 26, 2009, 03:37 PM
    I always use the whip:)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewer vent frosting over [ 4 Answers ]

I live in Minnesota and my sewer vent on my roof will frost over when it gets really cold out, sending sewer odor in my house. Do you know if there is anything to do to keep it from frosting over?

Kenmore 596.51672100 frosting up [ 19 Answers ]

I have a Kenmore side by side model 596.51672100 that has a condenser that keeps frosting up. I notice it each time the refrigerator fails to cool and then I see frost covering the back panel in the freezer. It used to do it every few months but now it's every few weeks. I have to remove the back...

What is Wrong, York H&A Unit Frosting/Freezing? [ 3 Answers ]

We are trying to find the cause of the unit to fost/freeze solid on the outside. I still heats. Will it cause more problems if we leave it running? We have had a repairman over 2 times, but he cannot pinpoint the problem.

How to fix the frosting issue in my fridge(not freezer)? [ 1 Answers ]

I bought a 2nd hand fridge/freezer and it's about 10 years old. The fridge is on top and freezer is on bottom. The freezer works fine however I found frost was generated inside the fridge around the back wall and right corner. The door seal seems OK and the temp setting is not too low. Before frost...

Whirlpool Refrig Frosting [ 3 Answers ]

I have a Whirlpool refrig model ET186KXFW0 1 manufactured in 1997. The freezer started frosting up about 2 months ago. I defrosted it but it's frosting up again. How do I fix this? Tom

View more questions Search