Ask Experts Questions for FREE Help !
Ask
    ZINGEAR's Avatar
    ZINGEAR Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2009, 02:25 PM
    Pullchain reassembly
    I can't get the chain ti retract--similar to cassie's problem. Don't know if I am putting the parts back correctly.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Aug 25, 2009, 04:29 PM

    Since you did not post on Cassies post we have no idea what you are talking about. Brand and model # may help us help you more. If the chain pull does not retract the switch likely needs to be replaced.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pullchain reassembly [ 1 Answers ]

I have the same problem as cassie with reassembling the pullchain for my hunter fan

Have an overhead pullchain light in the hall at the top of the stairs [ 1 Answers ]

I have a pullchain light that needs to be fixed. I would like to know if the pullchain part of the light can be fixed instead of buying a newone and if so how?

Adding a pullchain [ 2 Answers ]

I recently purchased a Hampton Bay ceiling fan with a remote control. The control is designed to be wired in and the fan speed and light to be activated by the control. There is no pull chain. I want to know if there is a way to add a pull chain to the fan. Any ideas?

Repairing Pullchain [ 2 Answers ]

Hello, Last night, I turned on my ceiling fan with the pullchain. The pullchain stuck on. I pulled apart the housing and removed the casing, but it appears the pullchain is completely stuck. Do I need to replace the whole casing, or can I fix the one I have?

Dryer Belt Reassembly [ 6 Answers ]

I replaced the rear bearing and I am having trouble with reassembly. Idler wheel assembly came apart in my hand. Any suggestions? " PLEASE HELP ":confused:

View more questions Search