Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cold water pressure is lower than Hotwater pressure
[ 1 Answers ]
In the bathroom sink, I see the hotwater pressure is very good . When I open the cold water it is very low. It is was fine 2 weeks ago. What could be the problem? Thanks Asaad
Deep well, pressure tank/switch not building pressure
[ 13 Answers ]
The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...
Low water pressure causing high blood pressure
[ 1 Answers ]
I have low or no hot water pressure to the downstairs bathroom. I've replaced the cartridges, valves and hot water heater, still no pressure... help.
Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c
[ 1 Answers ]
Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading
High pressure at sink, low pressure at shower
[ 2 Answers ]
Hello, My sink in the bathroom has good solid water pressure. Next in the circuit is the toilet, which also has good pressure at the angle valve. The shower, however has terrible pressure. I have removed the head, and the pressure out of the shower neck is no better. Shower neck exits the... View more questions Search
|