Ask Experts Questions for FREE Help !
Ask
    Rjncullen's Avatar
    Rjncullen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2009, 07:58 PM
    Whirpool gas dryer heating problems
    Have gas dryer Whirlpool Model LGR4634JQ initial start and ignitor starts and flame is visible then shortly after 5 minutes or so flame goes out and no flame and no heat for remainder of cycle. Checked vent OK, so replaced gas coils thinking they were bad did not fix problem. Any body with any more suggestions

Check out some similar questions!

Whirpool Dryer Overheating [ 2 Answers ]

I own a Whirlpool Duet Dryer Model: WED9200SQ- purchased Nov 2007. Two weeks ago it stopped working. *** 3 months after One Year Warranty*** Power on, buttons work, timer starts counting down, but no tumbling, no air, no heat. I am no expert repairman but thought with a little research I might...

Whirpool dryer [ 1 Answers ]

I have a whirlpool cabrio that does not get hot anymore

Whirpool dryer [ 1 Answers ]

I have a whirlpool cabrio that does not get hot anymore any help

Whirpool Dryer not shutting off [ 1 Answers ]

I have a Whirpool LER 7646AW1 clothes dryer that will run for at least 8 hours when set on the 60 minute cycle. Is it just the timer that needs to be replaced?

Whirpool Dryer Doesn't [ 1 Answers ]

I have a Whirlpool Dryer model number LEN3634DW1. It does not dry well at all. I have cleaned out all of the lint things, I have replaced the heater element and the hi-temp components. This has only improved performance marginally. What else should I try?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.