Ask Experts Questions for FREE Help !
Ask
    bmays3's Avatar
    bmays3 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2009, 11:46 AM
    Change a blade drive belt on a 38" 12.5hp Poulan
    How do you change a blade drive belt on a 38" 12.5 hp Poulan?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 22, 2009, 12:44 PM

    Hi,
    Generally it can be done without tools.
    Picture attached:
    Peace,
    Clarke
    Attached Images
     
    bmays3's Avatar
    bmays3 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 22, 2009, 01:30 PM
    Thanks, I downloaded the manual and that's what it said too. Now I'm trying to find the correct size. Poulan order department can only tell me the part number not the size. Same for the Tech Support desk.

    The part number is 193214.

    Thanks for your help
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Aug 23, 2009, 06:18 AM

    Hi,
    Thought I had found the info on that belt, but then found it to be incorrect. Had to Delete a post.
    Now I did find it, and it was best I did delete the bad info. The 193214 is 1/2"x90.2" by specs I did finally find. This link did it:
    AYP (Sears/Roper) OEM Replacement Belts
    Peace,
    Clarke
    bmays3's Avatar
    bmays3 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Aug 23, 2009, 07:24 AM
    Thanks for your help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poulan/Weedeater lawnmower drive belt replacement [ 1 Answers ]

I need to replace the drive belt on my Poulan/Weedeater lawnmower. Does the cutting blade and engine have to be removed to put on a new belt? I would like to see a diagram if one is available.

How do I change the blade drive belt on a 46 inch murray lawn tractor? [ 1 Answers ]

How do I change the blade drive belt on a 46 inch murray lawn tractor?

Poulan drive belt replacement. [ 7 Answers ]

I am wondering if you could send me a picture containing drive belt replacement of a poulan 14.5hp, 42 inch cut lawn mower. Thank you

Murray 14 hp 42" cut Blade Drive Belt Loose [ 3 Answers ]

What are ways of tightening the blade drive belt on a Murray Model 42813A Riding lawn mower with a 42" wide cut? Just installed new one & blades will turn while mower is stationary, but will stop while trying to run over any grass?

View more questions Search