Ask Experts Questions for FREE Help !
Ask
    cchav61590's Avatar
    cchav61590 Posts: 19, Reputation: 1
    New Member
     
    #1

    Aug 15, 2009, 03:31 PM
    changing tstat from Honeywell T841A1712 with Lennox T8611g
    PLEASE need help-would like to change thermostat on my American Standard model WYC060F100AA heat pump. Current wiring on Honeywell T841A1712 thermostat is:
    X- BLACK WIRE
    R- RED WIRE
    G- GREEN WIRE
    W2-WHTE WIRE
    B-BLUE WIRE
    E-BROWN WIRE
    Y-YELLOW WIRE
    O-ORANGE WIRE

    New thermostat Lennox T8611G has: R,C,Y,B,L,X1,X2,G,E,W2 & O
    QUESTION? Should my connect be :
    OLD TSTAT-----------------------------NEW TSTAT
    X- BLACK WIRE ---------:confused:----------- X1- BLACK WIRE
    R- RED WIRE------------------------- R- RED WIRE
    G- GREEN WIRE---------------------- G- GREEN WIRE
    W2- WHITE WIRE---------------------- W2- WHITE WIRE
    B- BLUE WIRE-----------:confused:----------- C- BLUE WIRE
    E- BROWN WIRE--------------------- E- BROWN WIRE
    Y- YELLOW WIRE -------------------- Y- YELLOW WIRE
    O- ORANGE WIRE-------------------- O- ORANGE WIRE
    Thank you in advance for any and all assistance with this task!
    Charles
    jackhardy's Avatar
    jackhardy Posts: 5, Reputation: 1
    New Member
     
    #2

    Aug 15, 2009, 06:45 PM
    Yes
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #3

    Aug 15, 2009, 08:08 PM
    What does the black wire go to on other end?
    The blue to c is right,I think, see if the blue goes to common in your furnace

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell to Hunter tstat [ 6 Answers ]

I am wanting to replace my old Honeywell Chromotherm III to a Hunter Set & Save 44260. The wiring from the old is: W-white, G-green, C-blue, R-red, Y-yellow and orange is not connected (O,W,G,C,R,Rc,B,Y). My new one is labeled G,RC,RH,Y/O,W/B & Y1 with RC & RH jumped. I have gone through most of...

Honeywell tstat with aux heat [ 3 Answers ]

I have a new luxaire heat pump with aux heat. I am replacing the tstat. Is the supposed to be a wire for the aux slot? I have the red on the r/rc, the blue on the c, the yellow on the y, the green on the g and the white & orange together on the o/b. any ideas are welome. Thanks Gretchen ...

Upgrading to a Honeywell TH8320 tstat [ 1 Answers ]

I recently purchased a Honeywell TH8320 programmable thermostat to bring a little energy efficiency to my new home. I have a Carrier 25HBA3 Base Series split system pump with a unit outside, and one indoors (installed up in the attic space above my garage). I detached the previous thermostat and...

Converting from Honeywell LR69071 to Honeywell T8611G [ 1 Answers ]

I have a Honeywell LR60971 with these connections: R Red X Blu G Grn Y Yel O Org W W2 B Blk E Brn


View more questions Search