Ask Experts Questions for FREE Help !
Ask
    infojoe's Avatar
    infojoe Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 15, 2009, 12:16 PM
    Kenmore dehumidifer coil frost buildup
    I have a kenmore dehumidifer and I am in the procees of checking it out.
    It needs a new display PCB, and before I spend any good money I would like to know if its working OK.
    So far it does seem good but I am getting some frost build up on the front coils. My question is how much is good , how much is bad and what is normal?

    Right now its about 25% covered down from the top.

    Thanks

Check out some similar questions!

Kenmore Elite frost-free side by side, with ice maker, freezer building up frost [ 4 Answers ]

We have a Kenmore Elite frost-free side by side refrigerator with ice maker. It's 2 years old but for the past 2 year+ we've been having problems with the freezer building up frost around the inside, and then the refrigerator doesn't get cold. I have to unplug everything, take the shelves out of...

Frost Buildup In Refrigerator [ 4 Answers ]

Hello I have a GE tfx22krdww side by side refrigerator and it's approximately 8 years old. Recently I've had to unplug it about once a month to remove the buildup of frost in the freezer portion. I really need to get this fixed but because of the economy I was hoping I could repair it possibly...

Kenmore Elite frost-free s/s freezer freezes up [ 1 Answers ]

We have a Kenmore Elite frost-free side by side refrigerator with ice maker. It's 2 years old but for the past 2 year+ we've been having problems with the freezer building up frost around the inside, and then the refrigerator doesn't get cold. I have to unplug everything, take the shelves out of...

Ice buildup in bottom of kenmore freezer [ 5 Answers ]

My side by side Kenmore refrigerator/freezer model number 106.54612300 has something gone haywire with the defrost cycle. Ice has been building up on the bottom of the freezer. I defrosted it manually and made sure that the drain plug was clear, twice now, and that did not solve the problem....


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.