Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat problems or furnace problems
[ 22 Answers ]
Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...
Problems with SX 80 furnace
[ 3 Answers ]
Have Ultra SX 80 , furnace with fire for 10 sec, then will shut down , will fire again in about 1 min, blower motor is on from start ,doesn't seem to wait to heat up fire box.
Furnace problems
[ 1 Answers ]
I have a gas(propane) furnace. It has a glow plug, which a automatic ignition. The glow plug lights up and the furnace kicks on but about a minute or two after it will turn off. There is no fire that is on and I know there is propane going to the house. Can anyone help me out. Furnace brand...
Furnace problems
[ 1 Answers ]
I have an Intertherm gas furnace and the draft inducer stays running after the furnace cuts out. Any Ideas Why?
Furnace problems
[ 5 Answers ]
My unit is about 9yrs old. It's an Evcon/Coleman... The problem is that when you set the temp. it will kick on but there is no fire through the little window. It will not light at all. Could something need cleaned or adjusted and if so how do I go about doing it. I am somewhat mechanically... View more questions Search
|