Ask Experts Questions for FREE Help !
Ask
    gusman6350's Avatar
    gusman6350 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 11, 2009, 08:49 AM
    Ao smith power shot blower never stops without power cycling
    I have an 8yr old AO Smith 70 gallon powershot water tank, recently it has been exhibiting the following symptoms: If powered off and then powered back on the blower starts and the burners come on and the water gets hot, but the blower never shuts off and once the burners shut off they never come back on until I turn it off and back on at which point it does the same thing again.

Check out some similar questions!

Only furnace blower goes on at power up. [ 6 Answers ]

I have a Tempstar Furnace Model NUG5100 BFB2 installed in 1995 I think. When you power up the unit the furnace fan comes on and that is all. Have checked thermo, changed to another, replaced furnace module(fan timer control) and still only the fan will blow. Help if you please.

Power Mower stops as soon as it starts [ 1 Answers ]

I have a PowerMore OHV 173cc power mower, it starts just fine but stops within two or three seconds, this just started. I have not had any problems prior to this. I have changed the spark plug but problem still continues.

Blower getting power but not turning [ 2 Answers ]

My blower in my central air conditioning is not working properly. Everything else seems to be working. I turn off the power to the unit and took of the cover to get to the blower, everything looked fine and the blower turns smoothly, but I noticed a slight burning smell. I turn the power back on...

Power to furnace control board but stops there [ 3 Answers ]

Hi I was given a Nordyne KG6RA gas furnace. After installing, I turned on and there was a low hum when the power got to it. I held the door switch closed so I could see. After a few seconds there was a spark and then blue smoke and everything went dead. I could not see where the smoke came...

New blower with no power [ 7 Answers ]

Just bought this ariens 5 hp 22 or so wide, snow blower with 8 speeds and electric start when I start it it starts fine but when iget to snow blowing it just throws it a foot or so and then gets colged it almost seems like it's not spining fast enough or something ?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.