[Limabean]

I've got a Hunter Ceiling fan with remote fan/light kit. All was working fine until I replaced a bulb. I did not, (I found later) use the recommended bulb. When I turned the light on, it came on but looked funny. Once I turned it off then back on, it would not light. I tried then replacing with a correct bulb and it would not light.

I just took the light kit off, and noticed the black wire going into the remote light kit (white light assembly 85112-04) looks like its cut half in to. I can't tell if that's cut or blown open. Should I NOT try to splice that wire and try it again, but rather just buy a new kit? If it is blown, would this have taken out the remote too? The remote is still turning the fan off and on.

[ceilingfanrepair]

I'm not sure EXACTLY what it looks like, pictures might help. Or just order whatever parts are recommended from Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats they might be able to walk you through replacement if you call.