Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Coleman Electric Furnace - Limit Switches ?
[ 11 Answers ]
I have a Coleman 3300L823 (23Kw /78,000 BTU) furnace with 4 elements stacked vertically (bottom-up 1, 2, 3, 4) in the heater box above the blower . Sequencers are working correctly. The elements are all in good shape. However, when the weather gets around 0 degrees F, the furnace has a hard...
1 light 3 different switches
[ 2 Answers ]
How do I control one light with three different (DPDT) switches? And without the use of four way switches?
Electric switches not working properly
[ 4 Answers ]
Hello! I have a ceiling fixture controlled by two switches at different locations. The light does not light. I also have a light over the sink, the only way I can use it is to turn on the outside light. There are three switches in one box on wall. There were dimmers on two switches. I removed the...
Changing light switches and now electric plugs don't work
[ 2 Answers ]
I am trying to change the light switches in my apartment. I found out after taking out the old switch, that there is no ground but there were 3 separate black wires coming from the box. I changed the old to the new switch, but since there were 3 black cables coming out, I only back mounted 2 of the... View more questions Search
|