Ask Experts Questions for FREE Help !
Ask
    gbschul's Avatar
    gbschul Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 22, 2006, 02:56 PM
    Kenmore Dryer Timer problem
    I have a Kenmore Elite dryer, 6 years old. The dryer will only turn on in the auto-moisture setting and then quickly speeds through and shuts off. Won't operate on the normal timer setting
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
    		  
    #2

    Oct 22, 2006, 06:53 PM
    Sounds like your timer is messed up. If that's all its doing, Id try that first. After all, the fact that it will run in the auto moisture setting, but only speeds through it to quickly suggest to me that everything is working.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer [ 4 Answers ]

My dryer go on but there's no heat I just had it fix for the same problem. I was told it had a breaker that may turn heat back on. HELP I don't know where it is. Thank you.

Kenmore Dryer [ 2 Answers ]

My dryer runs. But, there is no heat. Is that an easy fix?

Whirlpool gas dryer timer not working [ 1 Answers ]

My Whirlpool gas dryer is having a problem where it won't stop drying without manually shutting it off our opening the dryer door. The timer stays at the same place where it started and does not progress. The sensor timer does not work either, stays still. They dryer will literally run for hours...

Kenmore Timer Knob Removal [ 1 Answers ]

I have to replace the water temperature switch on my Kenmore Washer but am unable to rempve the timer knobs. How is this done? The timer knob actually consists of two knobs with a clear plastic disc between them.

Kenmore dryer heating problem [ 3 Answers ]

I’ve read through some of the post but have not actually found this questions. I have a Kenmore dryer that only heats when it is on the high heat/low heat setting. Any ideas?

View more questions Search