 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1992 chevy s10 bkazer - vaccuum lines
We recently got this blazer that had been sitting for quite a while. It runs great but won't go into 4wd. It apparently had this problem before and there was a bad vaccuum line. We have found a diconnected line and a couple that are damaged or missing (probably mice) We can't find where they feed from. Repair manual was useless for this problem. Does anyone know where the vaccuum lines lead from to the transfer case etc... Thanks for any help with this!
|
||||
Check out some similar questions!
Where is the fuel pressure regulator on a 1992 s10 blazer, mine is running rough and the smell of fuel is very extreme, si suspect the diaphragm has gone bad and raw gas is leaking into the manifold but don't know where to find it.
My truck was dying when I was idle. Then it just died while I was moving and refused to start. I have no spark it won't catch. I tried a new starter, but that did not help. So,. It's been suggested that it may be something to do with not getting any fuel. Please help.
My 1992 chevy 2500 4x4 with a 5.7 L motor won't start. There is fuel at the motor but no spark. I have changed the dist cap, rotor, ignition mod, and the coil the plugs and wires are only 1 yr old. I had the main computer changed about 6 months ago with a reman. The viechel has about 140,000...
My buddy is stuck in Miami because his truck has no spark from the coil. Engines getting fuel and turns over, but there's no spark. Any ideas where to start looking?
Where is the oil sending unit on a 1992 Chevy S-10 2.8 Liter?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
