 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Condenser installation
I just installed a new goodman 4 ton condensing unit and when the compressor starts about 5 seconds the compressor starts making a loud noise and shakes the condensing unit really bad for about 5 to 10 seconds and then starts running fine. What could be the problem.:)
|
||||
|
||||
|
The person who installed the unit has no idea what they are doing. If it continues to run like you say you will destroy the compressor in short order. I suggest you contact a qualified contractor with the proper certification to do a on site survey of the situation and make the corrective steps before more damage is done.
If you have the license to handle the refrigerant then you took the test. If you passed the test then you already know what the problem is. We all enjoy helping people on this board but we do not participate in illegal activities. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Ok looking for a little help old fan motor was getting hot and internal trip going off after about 15 min. changed fan motor with an exact replacement, same thing is happening goes off in about 15 min. unit is clean capacitor is correct for new motor and wiring is correct when its running blades...
How do I wire a condenser fan motor?
Have and outside Goodman AC unit and Goodman furnace (inside duh!). Anyhoo, after installing new blower motor the AC unit will not kick on. Have reset outside breaker, and double checking wiring on controller board on furnace, noticed one blue wire was disconnected, reconnected that and still not...
I live in a condo. All of the units in the building need to new air conditioners because they are all old and will not survive a scheduled reroofing of the building. The association got a bid for a company that will put in a new condenser unit for anyone who wants one - it is about $1500 installed....
View more questions Search
|
