Ask Experts Questions for FREE Help !
Ask
    Rosie atia's Avatar
    Rosie atia Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 2, 2009, 10:33 AM
    Valves in Veins not functioning
    My legs hurt after standing on them all day. After seeing a heart specialist, he said that the valves in my legs aren't opening to allow the blood to return back up my legs. This is not life threatening but the legs do hurt a lot. I have opted to not have surgery ( veins stripped). Is it possible for the valves to recover? Perhaps if I loose weight or exercise?
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
     
    #2

    Aug 2, 2009, 11:00 AM

    Yes, the condition is called CVI or chronic venous insufficiency, chronic meaning, it doesn't go away, you are stuck with it, so the only thing you can do is damage control. Plenty of exercise, keep legs and feet up when relaxing, yes, lose weight. There are massages you can do, like running your hands up both sides of your leg, doing it several time, as in pulling the bloodback up your leg is the only way I can describe it.

    The downside is of course, if you don't control it, stay active, as I mentioned above, legs become ulcerated from lack of blood.

    Not many people have the surgery for this condition. Rosie, it is a not uncommon condition. Did you doctor suggest a mild blood thinner, as a 8lmg aspirin pe day? You may want to ask him if that will help.

    Good luck and regards

    Ms tickle
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
     
    #3

    Aug 2, 2009, 04:20 PM

    Here is a great site. I don't know what the
    Doctor has recommended for you but I do know that angioplasty can be used.

    VascularWeb: Chronic Venous Insufficiency

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A/C Condenser fan not functioning. [ 15 Answers ]

My a/c is not working. The fan is blowing air but it is not cold air. It seems that the condenser fan is not kicking on when it is supposed to. We thought that it was the motor, because it would turn some, but slowly as if the bushings inside the motor were bad. Well, I got a new fan motor,...

Installation of Check Valves and Gate valves [ 2 Answers ]

Where is the ideal location to install Gate valves and Check valves for a domestic water supply system?

New Thermostat not functioning [ 7 Answers ]

I recently "upgraded" to a digital thermostat so I could program heat cycles while out of the house. The HVAC unit is an Intertherm sealed cumbustible furnace model number MGHA-056ABFC-01 that runs on propane. The entire unit sits in the house and it has two wires going to the thermostat (red and...

Av not functioning [ 2 Answers ]

Hi I just tuned in my television it is a bush ak20 with a scart socket, using a universal remote. It changes the channels and volume but it won't change to av channel with the button that's on the remote and I can't play my playstation 2 with no av I'm going mad here people help!!


View more questions Search