Ask Experts Questions for FREE Help !
Ask
    joseph g's Avatar
    joseph g Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 30, 2009, 08:41 AM
    Crank no start
    How do I time a 1991 honda civic with a rebuilt distributor? I got a crank no start
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jul 30, 2009, 08:49 AM

    If the CEL comes on and goes off after 2 seconds, when the ignition switch is turned to ON, the problem is likely with the distributor. I only recommend genuine Honda distributor housings, since we've had so much trouble with all of the aftermarket brands. Aftermarket ICMs and coils have been fine, however.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cherokee will crank no start [ 5 Answers ]

I have a 1992 jeep Cherokee limited . My jeep will crank over but it won't start. It has a new coil pack newer plugs. Fuel pump runs 1 psi more than it should I don't think that effects anything. It has a brand new crank sensor. Newer 136 amp alternator. Newer distributor . 1 yr old fuel...

Mower won't start/crank [ 6 Answers ]

I have a 14 HP B&S Murray Riding Lawn Mower that won't crank. It is an older mower but has been very good and is well maintained. When I try to crank it the flywheel turns a half turn or so and seems to be locking/hanging up. I have just purchased a new battery. No luck. Seems this happened once...

Craftsman B&S 20HP Will Not Crank / Start [ 1 Answers ]

On a 2003 Craftsman 20hp Briggs, the engine will not turn over. Figured I left the lights on or key engaged - so I connected a Sears batterycharger with starting option on. Nothing but a quiet click, Battery charger appears to show the battery is charged - because there is no drop on the...

95 Mazda 929 won't crank or start [ 10 Answers ]

I have a 95 929. Its been really good to me up until last week. It'd been acting like it had weak juice, not wanting to start right away, especially if I ran the ac before I cut it off. Last Friday I start it in the morning and after a few worrisome secounds it started up. After work, same thing....

94 camry ECM code no.1 crank no start [ 4 Answers ]

Hi, Check report: According to repair manual, checked ECM code, but read diagnosis code is No.1(means normal). Condition: 1.Battery voltage is above 11v.(done, new battery) 2.The throttle is fully closed.(no done. I did not know how to close it) 3.Transaxle is in Neutral.(done) ...


View more questions Search