Ask Experts Questions for FREE Help !
Ask
    lee-pine's Avatar
    lee-pine Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 28, 2009, 11:59 AM
    Belt diagram
    I need a belt diagram for a 165 hydro john deere mower
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jul 28, 2009, 12:01 PM

    Got a full model number? john deere belt diagram - Google Images
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #3

    Jul 28, 2009, 03:35 PM
    Hi,
    You were given a good link and as luck would have, the hydros in that series were the first picture when I looked. Notice that the steering link is disconnected and the piece that goea from one side of the underside of the frame is disconnected and rotated a bit. Both are necessary. Also, notice the idler up at the top next to the electric clutch; it is not positioned quite correctly. Not as big a deal with the hydros, but crucial with the gear driven brothers. The slot is shaped like a flattened out "J" and the idler should be positioned in the center of the slot with the guide pointed directly outward. As I said, not that important with the hydros since the pedal is not a clutch, only a brake and the hydro will do that itself with the controls. On the gear the belt does not take that twist toward the back and if the idler is out of place, the clutch does not fully work. By the way the right hand side goes to the top after passing between the two idlers, the only push one way againsy the spring, so push to more or less straighten ou the path and put the belt between them so as to tension it when released.
    Peace,
    Clarke
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Belt diagram [ 1 Answers ]

Mower belt diagram for a craftsman 1000 42" riding mower

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

Belt diagram murray 17 hp 42 inch belt [ 4 Answers ]

I boke the primary belt on my murray 17 hp 42 inch mower and I can't seem to remember how it went on,please help.:o

Belt Diagram [ 1 Answers ]

How Or Where Do I Find A Belt Diagram For Replacing V-belt On A Craftsman 19 Hp 42' Riding Mower


View more questions Search