Ask Experts Questions for FREE Help !
Ask
    bassassisn's Avatar
    bassassisn Posts: 4, Reputation: 1
    New Member
     
    #1

    Jul 26, 2009, 10:52 AM
    Can you replace a floor flange for a toilet?
    I had a clogged toilet, and using a snake or plunger did not work. I assumed that my five year old had put something in the toilet. I removed the toilet and was shocked that I had roots growing underneath my floor flange and into my drain pipe. Getting the roots out of the drain was a chore, but got them all out. I noticed that the flange is cracked by the bolts, and some roots (1/8" diam) were pushing up the flange. The flange is high on the bolt sides, but flush front and back. The flange is pvc. How do you replace a flange, and any idea how to kill the roots? I did not pry on the flange for fear of breaking it off totally.
    I do believe it is glued because of the purple primer on the pvc. Any help would be greatly appreciated.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jul 26, 2009, 01:10 PM
    Quote Originally Posted by bassassisn View Post
    I had a clogged toilet, and using a snake or plunger did not work. I assumed that my five year old had put something in the toilet. I removed the toilet and was shocked that I had roots growing underneath my floor flange and into my drain pipe. Getting the roots out of the drain was a chore, but got them all out. I noticed that the flange is cracked by the bolts, and some roots (1/8" diam) were pushing up the flange. The flange is high on the bolt sides, but flush front and back. The flange is pvc. How do you replace a flange, and any idea how to kill the roots? I did not pry on the flange for fear of breaking it off totally.
    I do believe it is glued because of the purple primer on the pvc. Any help would be greatly appreciated.
    Why go through the hassle of replacingv the flange when you can repair it?
    Most big box stores will carry flange repair kits,(see image) that just slip under the old flange. To replace the old flange you will have to Cut out the old glued in flange and install a new one.
    Now let me help you out with those roots. If you wish to control roots RootX or Robics Foaming Root Killer that contain Dichlobrnic are two products you could try.
    A less expensive way would be to call around to garden supply stores and ask for fine grain Copper Sulphate. Put a 1/2 pound in your toilet and flush it down. Repeat in 6 months.
    Hope this helps and thank you for rating my answer, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet Flange Offset or Replace Cast Iron Main with PVC? [ 1 Answers ]

Let me start by saying I am remodeling a small slab house in Englewood, FL. This cinder block house was built in 1950 and has a cast iron main sewer pipe under the toilet. I might add that I am not living in this house during the remodel. I am both new to remodeling and also new to this forum...

How to replace rusted toilet flange [ 2 Answers ]

Hi I just signed up, hoping someone has some advice for me. Am the new (starting to be horrified) owner of a 118 year old house, needless to say I have a LOT to do. I had noticed the downstairs toilet was wet around the base, thought it just needed a new wax seal, pulled up the toilet and lo and...

Toilet drain pipe below floor; need to replace flange [ 5 Answers ]

The toilet in our master bedroom was leaking around the floor. I turned the water off, flushed it one last time to get the water out of the tank, and called the plumber, who stopped by today. I wasn't there, but my g/f took a bunch of notes. He unbolted the toilet and pulled the flange out...

Replace toilet flange [ 1 Answers ]

How do you replace a broken toilet flange in a cast iron pipe in a cement floor?

Replacing toilet floor flange [ 3 Answers ]

I was replacing my toilet and found that my flange was rusted so much that I couldn't get the flange bolt on one side to lock into the flange so I must replace the flange. It's made of metal with ABS and obviously is glued into the ABS sewer pipe riser. I'm assuming that I need to get underneath...


View more questions Search