Ask Experts Questions for FREE Help !
Ask
    HolbD002's Avatar
    HolbD002 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2009, 11:09 AM
    Removing CRV rotor cap
    I am trying to replace the ignition coil on my 2001 CRV.

    I have read instructions saying in order to remove the rotor cap to get to the coil, there is a screw that needs to be removed. I cannot find a screw anywhere - I have turned the cap repeatedly and completely removed the distributor to get a better look at all sides of the cap. There is no screw.

    Can anyone offer any insight?

    Thanks!
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 25, 2009, 11:20 AM

    It looks like, to me, there are three 8mm screws mounting the distributor cap to the distributor housing:

    http://www.autozone.com/autozone/cat...andName=Dorman

    Inside, it appears there might be a location for a screw mounting the rotor to the shaft:

    http://www.autozone.com/autozone/cat...archText=rotor

    Most Honda rotors have a screw, some don't.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Zita by arturo rotor [ 1 Answers ]

Hey! Can someone please give me the summary and analysis about the story of ZITA by Arturo Rotor? Please! Your help is very much appreciated ;)

Removing rotor from 1992 Hounda Accord LX [ 6 Answers ]

How does one remove rotor from 1992 Honda Accord LX? I did replacemthe cap, but was unable to remove the rotor. Does this rotor have set scre (my new one does not)?If so then how do you access the set screw? There is a black plastic cover plate. Thanks

Brake rotor [ 1 Answers ]

How do I remove the brake rotor on a 1992 honda accord

91 honda rotor [ 1 Answers ]

Does anyone know how to get the round piece ( rotor ) I think off.

View more questions Search