Ask Experts Questions for FREE Help !
Ask
    pines4's Avatar
    pines4 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 22, 2009, 02:18 PM
    Amana air conditioner
    Our amana ac does not turn off when temp setting on tstat is reached. Any ideas?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jul 22, 2009, 02:33 PM
    Shorted low voltage wires
    Stuck contactor
    Bad tstat
    ,gives you somewhere to start,,
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
    		  
    #3

    Jul 23, 2009, 08:47 AM

    First check to see if the tstat is still calling for cooling, and take it from there
    pines4's Avatar
    pines4 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jul 23, 2009, 11:26 AM
    Thanks for the info, much appreciated!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to Replace GE Fan Motor for outside York air conditioner air conditioner [ 2 Answers ]

The motor model number is 5KCP39EG IT IS A HP 1/4, VOLT 208/230, rpm 1075, hz 60-50 pHASE 1. Are they making this motor anywhere? If so where? Thanks

Amana Air Conditioner [ 1 Answers ]

I have an Amana AC Model PHB30C02D and do not know how to wire it in. We acquired this second hand and need to have a schematic to install. Any help you can provide will be appreciated.

Outside Air Conditioner Unit Runs When The Air Conditioner Is Switched Off [ 4 Answers ]

We bought a Panasonic split system inverter air conditioner (7.4kw) brand new over Christmas so it is only a couple of months old. We had it installed by a qualified air conditioner installer and everything works perfectly as it should. However we have noticed recently that when the air conditioner...

Amana furnace [ 2 Answers ]

I misplace the wiring diagram and installation manual for my Amana Furnace. Any chance someone, website may have a good source for that: Mod # GUCO70B40A, Serial # 9110104173, Mfg # P9114303F Suggestions for a fix would be appreciated also: Having problems starting. The igniter works fine...

Amana 80 sse [ 1 Answers ]

Can you tell me how to clean the striking unit on my furnace. Every year because of the dust that gathers, I have to pay someone to do this. One tech told me how, but I do not remember. Due to the venting of our furnace it is an ongoing issue and does not warrant the $$ of the cleaning yearly.

View more questions Search