Ask Experts Questions for FREE Help !
Ask
    redchl's Avatar
    redchl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2009, 11:03 AM
    Chosing the right 20amp receptacle
    I am installing a 20amp single post breaker to run my air compresssor and was wondering what 20amp receptacle I should use. It will be in my garage and I am wanting to have two receptacles on the same line. I also was wondering if I use the first receptacle as a junction for the second or use a pigtail for the junction? I will be grateful for any help. :confused:
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jul 20, 2009, 11:11 AM

    Pigtails are always better. Use higher quality receptacles like from Hubbell from a supply house rather than the $0.62 cent variety.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chosing apartment pet [ 8 Answers ]

I live in an apartment as I have done since I was little. Unfortuntely every apartment I have lived in has not allowed cats or dogs as they cause too much noise and trouble. Also a lot of the body corp members share the view that it is wrong to keep a cat locked up all day. My 55 year old...

Chosing first pickup [ 1 Answers ]

so I made up my mind that I want to get a pickup truck instead of a crossover. What I'm looking for is good fuel economy, automatic transmittion, crew cab, 4x4, and a reasonable price of course. I'm most likely going to get a used one and am aiming for something under 20,000. so I'm stuck...

Chosing first truck/crossover [ 2 Answers ]

Hey guys! So I'm 18 years old and I want to get my first truck. I'm aiming for a truck/crossover... I want something that's -fuel efficient -sporty -automatic transmittion -room to transport dirt bike/snowboard/music studio equipment.. etc... -that other kind of room... uk... a play room...

20amp QUAD double pole versus 2 20AMP tandem single pole [ 2 Answers ]

I have 5 zones of baseboard heat, 3 of which were disabled due to the addition of a heat pump. The circuit panel is full and would like to restore the operation of the 3 zones of base boardheat. I was planning on removing 3 double pole 20amp 240 volt circuits and installing 3 QUAD 20 amp double...

Adding a 20amp receptacle to a 15amp breaker [ 2 Answers ]

Hi All, I need to install a small tankless water heater (made for under the lavatory sink) for the sink in my bathroom. The specs on the water heater are: 120 Volts, 2.4kW, 20 Amps, wire size: 10AWG. My question is this... The existing bathroom outlet that I want to splice into to add this water...

View more questions Search