Ask Experts Questions for FREE Help !
Ask
    Drumgirl's Avatar
    Drumgirl Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 20, 2009, 07:45 AM
    Problems with Casablanca bulb replacement
    I just recently tried to replace a Casablanca ceiling fan light bulb with the same spec bulb (E11 base, 120V, 100W mini candelabra) and the new bulb stays on all the time... I can't switch it off anymore... I tried this with two new bulbs, but same result. Please help!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Jul 21, 2009, 12:34 AM

    That's not a bulb problem, but a problem with the control. Is it an InteliTouch fan? Did you change the bulb with the power on?
    Drumgirl's Avatar
    Drumgirl Posts: 3, Reputation: 1
    New Member
     
    #3

    Jul 21, 2009, 07:23 AM

    I thought so after reading your other answers... it IS an InteliTouch fan and I DID leave the power on when changing the bulb, my bad. So, do I need to buy another wall control switch? Or is there any way to reset?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #4

    Jul 21, 2009, 09:07 PM

    Probably fried the controller in the motor. You can order parts from Casablanca Fan Repair it might get expensive.

    You play drums?
    Drumgirl's Avatar
    Drumgirl Posts: 3, Reputation: 1
    New Member
     
    #5

    Jul 22, 2009, 07:53 AM
    The fan still works from the switch and has intermediate speeds, does that suggest anything? Or should I just start ordering a new controller? Bummer. Yep, been playing drums as a hobby off and on for about 22 years now. Only played with a couple small bands though. Im a Civil Engineer for my real job. :)
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #6

    Sep 2, 2009, 09:59 PM

    Girl drummers are pretty cool, regardless of professional status. Check out Joy Williams, Sheryl Harper, DeArcus Curry (young girl from MS) etc on YouTube.

    Yeah it's fried. If you want we can just wire it to it's own switch, it will be much cheaper than fixing the IT.. . But then you won't have all the cool control capabilities.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling Fan Bulb Replacement [ 3 Answers ]

Very odd... I am trying to replace a bulb in a Hampton Bay 4 blade ceiling fan. Bulb I purchased looks like it fits, but will not screw in. Are there specific bulbs for each fan? This is in my son's room. He has gone to college, and apparently removed the bulb some time ago. Grr... I have no way of...

Casablanca Fan switch replacement [ 3 Answers ]

I really hope someone can help me.. I have a casablanca fan the pull switch stopped working so I went to Home Depot to buy a replacement.. I installed the wire exactly how they came out.. now it runs on only hi speed. I have a black wire, yellow, pink & grey. I returned the switch and tried...

Bulb replacement for ceiling fan [ 4 Answers ]

I have a Hamption Bay "Lazerro" ceiling fan I just bought from Home Depot. I can not find a replacement bult. The bulb is a coiled 4 pin compact fluorescent with a slotted area on both sides in the middle of the bulb. The only ones that Home Depot carried as replacemets had the slotted area off set...


View more questions Search