Ask Experts Questions for FREE Help !
Ask
    Sakhileshml7's Avatar
    Sakhileshml7 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 19, 2009, 10:07 AM
    How can I get T9 mode Software
    I wish to type matters in my computer using the numeric keys in the right side of the keyboard in the same way as in the T9 mode in cellphones Is there any free software for this purpose How can I download it?
    Dont treadonme's Avatar
    Dont treadonme Posts: 115, Reputation: -6
    Junior Member
    		  
    #2

    Aug 3, 2009, 08:11 AM

    It would be simpler to learn to type faster

    Master a DVORAK key layout for best results
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower in furnace works in heating mode, not in cooling mode [ 5 Answers ]

The furnace is an older model Carrier. I do not know at this time the exact model. It is at this time about 20 years old. The central air is a newer Carrier Performance series model. It is two years old. I have checked to make certain the blower moves freely; it does. The blower in the...

Carrier A/C Blower will not come on in A/C mode but works when in heat mode [ 3 Answers ]

I need some guidance. I have a Carrier A/C unit that has been working fine. Last night the fan stopped working for some reason in the A/C mode. But when I put the heat on, it works fine. The compressor and condenser work fine but the A/C fan just will not kick on. I thought it might be the...

Fan runs forever when in heat mode but not in ac mode [ 2 Answers ]

Great web site and concept!! I have a York forced air gas furnace that has a Honeywell Fan Limit switch. The unit works great in the summer. The ac and the fan shut off correctly. However, in the winter the heat will reach its temp setting and turn off but the blower continues forever. I have...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 6 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 2 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

View more questions Search