Ask Experts Questions for FREE Help !
Ask
    skeetecop's Avatar
    skeetecop Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2009, 12:10 PM
    Second theromstat - install
    I am sure that this is somewhere, but I pressed for time. I have a new two story home with a goodman heat & air. The second story has wires for a second thermostat. I was told that there are manual dampers but a motor and thermostat would need to be installed at a cost of a few thousand dollars. I am somewhat mechanically inclined and if I had the right info, I am hopeful that I could do the install. Can anybody help me with the parts and a diagram (where I can go to get this stuff) so I can install myself? I hate to take the job away from a pro, but I work for the state of CA and my pay is being adjusted on a monthly basis.. THANKS!!
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jul 16, 2009, 08:17 PM
    Unless you know someone I kind of doubt any parts houses will sell you what is needed to do the install yourself most sell to (contracters only)

    And if you do get the parts unless installed by a professional, you won`t get or have a warranty with the equipment needed

    Something to think about,, warranty and fire safety
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White Rodgers theromstat sticks on "Hold" [ 1 Answers ]

We have a White-Rodgers Comfort-set 70 Series thermostat in our apartment. We have it programed for each day. The thermostat keeps shifting to the "hold" setting on its own and disregards our programming. When we press "run" to continue the program, the clock automatically goes to 12:00. ...

Where is fuse of theromstat? [ 1 Answers ]

Hi! Can anyone help me? I want to know where is the fuse of theromstat? Is that inside or outside?

Honeywell Electronic Theromstat malfunction? [ 1 Answers ]

My furnace shuts down randomly and does keep house at selected temperature. When I push to raise the temp there is no response from furnace after it has shut itself down. The thermostat is a cheaper model from Target installed last summer. The furnace is 4 years old. The first repair man...

Theromstat RTH 230B - Heating AC [ 1 Answers ]

I'm having trouble with the heating function of our Honeywell RTH 230B. I have the following wires: Red, White, Blue, Green. I have hooked up the wiring to the following: RH - Nothing (Jumperd) RC - Red W - White Y - Blue G - Green. When I turn on the heating nothing happens, even when I...

View more questions Search