Ask Experts Questions for FREE Help !
Ask
    Jrdnmllr's Avatar
    Jrdnmllr Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2009, 02:02 PM
    Maytag Neptune Model MDG4000AWW no pilot no heat
    The pilot is not lit therfore there is no heat what steps should I take or what parts should be replaced thanks so much
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 12, 2009, 06:52 PM
    Usually it is the glow coil or ignitor that is defective. Your unit does not have a pilot light it uses a ignitor that glows to cause the gas to light.
    Jrdnmllr's Avatar
    Jrdnmllr Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 19, 2009, 11:13 AM
    Hvac1000 just wanted to say thanks u were right and saved us a service repair call
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jul 19, 2009, 10:29 PM
    Good deal. Glad you got it going.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Neptune Dryer Model # MD5500 [ 1 Answers ]

My dryer started with a chirping noise and now it makes a bunch of noises. My husband really needs a repair manual to try and determine what is wrong. It still drys the clothes but makes terrrible noises.

Maytag MDG4000AWW dryer does not generate enough heat [ 3 Answers ]

Mod# MDG4000AWW. Ser# 10785892WD. I removed vent and front panel. When start dryer, it clicks a couple times then the glow plug lights and the gas flames for about 10-15 seconds- then off. About 30-40 seconds repeats with shorter duration but adaquate flame. This second cycle repeats as long as...

Maytag neptune dryer model MDE5500 [ 3 Answers ]

The light comes on inside the dryer but the touch pad on the top of the dryer will do nothing. I have unplugged and checked to make sure the outlet is working, the fuse is not blown and I have called maytag and they had no answers. I am worried I have to replace the touchpad. Is there anything else...

View more questions Search