Ask Experts Questions for FREE Help !
Ask
    bassbone's Avatar
    bassbone Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2009, 05:47 PM
    Own a eagle 6.75hp engine only stays running when you slightly hold in the primer bul
    Own a eagle 6.75hp lawnmower engine on a craftsman push engine starts but only stays running when you slightly push in the primmer bulb, checked for hole but did not see anything, what am I missing?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 9, 2009, 05:51 PM

    Hi,
    Since the carb vents through the bulb; I would say you are compensating for a carb with a dirty main jet.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine light stays on and Engine stops at any time. [ 4 Answers ]

Had the engine light checked out by several mechanics can't find out why it stays on all the time. Plus the engine will stops running when I come to a stop. Other times I will park and go in to a store and come out and it won't start but will wait a few minutes and it will start up again. It is...

Engine light stays on [ 3 Answers ]

Can someone tell me what could be my problem, I have a 2000 Ford Windstar LX and the engine light is stayen on all the time, In the book it says it's a emission problem it runs great but wondering if I should be driving it Thanks for any help.. Dave

Service engine light stays on after being serviced [ 3 Answers ]

I have a 2002 altima 6cyl. 3.5 auto trans. The service engine light came on as did the oil light. I had it serviced since it was do anyway. When I got the car back the light was still on. The mechanic said it may be the "Timing Contor Solenoid". Any one know what this is. It was not easy...

A/C unit fan stays running [ 2 Answers ]

The FAN on the air conditioner unit on top of my house stays running all the time. The unit cools when it is supposed to, however when it's reached the room's temp, and the house thermostat automatically shuts of the unit, the fan staysd on. It even stays on when the slide switch on the thermostat...

View more questions Search