Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring an Electrical Subpanel
[ 1 Answers ]
Hello: I want to add electrical service to a shed that is close to my house. I would use the electricity for interior lights and small power tools. Would it be better to use two individual 120 volt runs from my house's circuit breaker panel to a subpanel in the shed, or should I use one...
Do I need an Electrical Subpanel?
[ 1 Answers ]
I have a 200 amp panel that is aluminum wiring. I had an air conditioner installed, and although it is on it's own breaker, it blows the main, not it's own breaker. It runs for a short time, but it always pops the main, even if almost nothing else in the house is running. Do I need to replace...
Electrical Subpanel
[ 1 Answers ]
I have used all the breaker positions in my existing electrical panel. I want to install a subpanel right next to the present one. Are there any code requirements about spacing?
New electrical subpanel in firewall
[ 2 Answers ]
I am in the process of building a 14x18' additon and a 24x30' garage (the addition is between the garage and existing house). My existing electrical panel (200 Amp), while having plenty of spaces for all of the new breakers I will need, I have decided to install a new subpanel in the garage as...
Electrical Subpanel
[ 1 Answers ]
I want to install a electrical subpanel(~50 amp) in my garage, if I do not feed the subpanel with a breaker from the main service of the house,would or could I tie into the main lugs of the main service to feed the subpanel? (Using the proper wire size) Would I have to use a ground rod for the... View more questions Search
|