Ask Experts Questions for FREE Help !
Ask
    rifredb's Avatar
    rifredb Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 7, 2009, 01:24 PM
    Troy bilt 2-cycle weed trimmer tb65ss line replacement
    Thanks

    Model is < 1 year old.

    Spool appears to have run out of line. Seek to add line.

    Trouble with step 1: cannot remove bump knob.

    Instructions advise to depress outer spool and unscrew bump knob ccw

    Bump knob will not unscrew

    Seek options for carrying through process of installing line, or replacing lower parts of unit!

    Thanks again!
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
     
    #2

    Jul 9, 2009, 01:11 AM

    It sounds like grass/weeds inside there are jambing you up.

    seek options for carrying through process of installing line, or replacing lower parts of unit
    I throw my bump spools out for weed eaters. Get the replacement spool end that allows you to put in two pieces of line in at a time. That line is sold at a very heavy thickness. Last twice as long because of the line being thicker. I carry a needle nose pliers to replace line as I weed wack It takes about 5 seconds to add new line.

    On my Echos I use a Titanium 3.9 mm square line on down. Love the difference in whacking heavy weeds down. The push ins accept many different thickness of line becasuse where you push the line in the 2 side holes the cams grab it no matter what. Leave about an 1/2" plus past the cams in the center of the spool. This allows easy plier/line pull through of broken line

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt weed eater TB475ss clutch removal [ 3 Answers ]

The centrifugal clutch on my Troy Bilt weed eater TB475ss is stuck. When the engine is running, the shaft will not spin. I can rotate shaft when not connected to clutch. I need removal instructions to separate the clutch from the engine.

How do you replace the trimmer line on a weed whipper? [ 1 Answers ]

I have a small electric black and decker that was given to me with broken line and no instructions.

Replacing trimmer line on a weed whipper. [ 1 Answers ]

How do you replace the trimmer line on a weed whipper?

Removing The Pull Cord Housing (Troy Bilt Trimmer) [ 1 Answers ]

I managed to remove the clutch rotary assembly which had a broken spring and need to be replaced. There is another item that has to be removed in order to remove the pull cord housing. Said item requires a wrench and must be turned counter-clockwise in order to be removed. The problem is that I...


View more questions Search