Ask Experts Questions for FREE Help !
Ask
    hoopster37's Avatar
    hoopster37 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2009, 07:16 AM
    Hunter Thermostat
    What does it mean on the wall plate for a 2, 3, or 4 wire systems: Use RC-RH jumper wire? Is a jumper wire simply a wire connecting RC-RH?
    siberianair's Avatar
    siberianair Posts: 360, Reputation: -4
    Full Member
    		  
    #2

    Jul 7, 2009, 07:39 AM

    Yes its simply a jumper system. 2 3 or 4 wire is for the unit and its controls.
    What type of system do you have? Gas? Ac? Heatpump? Oil? Tell us more info so we can try and help. You might not have the right type of thermostat at all.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Hunter thermostat [ 1 Answers ]

My hunter thermostat only turns on my furnace when it is set to heat and on not heat and auto and there are only two wires comimg from wall what can I do?

Hunter thermostat [ 1 Answers ]

What is the reset hole just to the left of the filter reset on hunter model 42995b for ? Have misplaced instructions. Thanks for any help

Hunter Thermostat [ 6 Answers ]

Just got a Hunter Thermostat my old one s wires are R,G,Y,W,B. the new one is G,RC,RH,Y/O,W/B,Y1. How do you wire this one I wired it like the instruction and AC works but NO Heat?? Help

Need Help with Hunter Thermostat Please [ 4 Answers ]

I have a Payne PF1MNC hvac, and just replaced my White Rodgers thermostat (It wasn't blowing hot air or kicking in in Auto mode) with a Hunter 44155C. There were 4 wires attached: G to G R to Rh (with jumper) Y to Y1 W to W And an unattached B I attached them the same to the Hunter:

View more questions Search