Ask Experts Questions for FREE Help !
Ask
    Broham's Avatar
    Broham Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2009, 05:54 PM
    Hot water pressure is low in the washing machine
    My washing machine hot water pressure is low it comes on when I turn on the hot water in the basin where the water empty from the washing machine
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 30, 2009, 11:46 PM
    There is a screen in the hose connection or on the inlet of the water valve on the washer that can get plugged up.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Awful cold water pressure (only to washing machine) [ 6 Answers ]

Hi there, I'm new to this site so please excuse me if I make a mistake. Anyway, I am having a problem with cold water pressure to my washing machine. I am on a well and get good pressure everywhere except to this area. The section of the basement that the washing machine resides is slightly...

Pressure drop upon relocation of washing machine [ 12 Answers ]

HI, my WM supply used to feed from the first branch of the municipal cold water supply pipe inside my basement. I relocated the WM and now feeds from right before the cold water entrance to the water heater, i.e. at the end of the loop after cold water branches throughout the house. This also...

Sudden loss of water pressure in all faucets (sinks/shower/washing machine) [ 8 Answers ]

Hey, I am hoping someone can help me out. We have a house 30 years old, copper lines, and we are on community water (so similar to city water but just provided by Aqua for the housing development). We had our water pressure drop suddenly this past Thursday (about 4 days ago) and it has not...

Washing machine - low hot water pressure. [ 4 Answers ]

First of all - Hi every one. I have a hotpoint washer which reports an error after 15 minutes. E11 check water supply. I have looked into this error and it means there is no (not enough) hot water after 15 minutes. I do not know if it is coincidental but I fitted a (replacement) new shower...

View more questions Search