Ask Experts Questions for FREE Help !
Ask
    mclab's Avatar
    mclab Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2009, 05:14 AM
    John Deere L110 Won't start
    I washed my mower - including the engine, and now it won't start. When I turn the key I get a clicking sound. The lights come on but the engine won't turn. The 20a fuse appears to be OK.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 30, 2009, 06:43 AM

    Hi,
    Somewhere you have compromised a connection. First clean the battery connections (always remove the negative cable first to prevent arcing) to make sure they are good. While the battery is disconnected, you may wish to clean the solenoid connections. They (the battery and solenoid "live" in proximity to each other on your model.
    Then carefully unplug the ignition switch and reconnect.
    Hopefully on of the above will cure the problem, assuming that simply allowing the machine to dry on its own does not.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L110 won't start [ 3 Answers ]

I have a 5 year old L110. Just replaced the battery. Started and ran fine on 2 or 3 different occasions. Pulled up on a slope where the front wheels were about a foot higher than the rear and shut the engine off for a minute. When trying to restart got a single click then NOTHING. Have...

John Deere L110 won't start [ 1 Answers ]

I have a John Deere L110 that won't start. It's not the battery or the starter. The engine turns over but it won't fire and I have already replaced the spark plugs and it did not help. It seems to be electrical I'm not sure.

View more questions Search