Ask Experts Questions for FREE Help !
Ask
    jakesdaddy's Avatar
    jakesdaddy Posts: 17, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2009, 07:17 PM
    Shower diverter
    My tub/shower has 3 stems. Hot, cold, & shower diverter.
    I had to replace a washer on the diverter, but when I re-installed it, the water comes out of the tub spigot and a little bit out of the shower. How do I properly reinstall this?
    jakesdaddy's Avatar
    jakesdaddy Posts: 17, Reputation: 1
    New Member
    		  
    #2

    Jun 25, 2009, 08:45 PM

    I think my problem is having the diverter in the correct open or closed position before screwing it into the valve

    How can I tell if the diverter is open or bottomed out?
    Which should it be before installing it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower diverter leaks into tub when turned to shower [ 2 Answers ]

I'm trying to replace my shower diverter valve since it leaks into the tub significantly when turned to the shower. It's a 3-knob system (hot, diverter, cold) and I don't know the brand. I've gotten the knob off, the surrounding piece off, and one nut off, but I'm not sure what to take off next...

Shower Diverter [ 37 Answers ]

Please excuse me if I don't have the terminology right. I have a Grohe shower set. The diverter is located on the end of the tub spout. The shower diverter doesn't seem to be working right. I have three problems: The diverter doesn't return to the tub spout when the water is turned...

Shower Diverter [ 1 Answers ]

How to I re-install the knob you pull in order for the water to divert from the faucet to the shower head?

Shower diverter [ 1 Answers ]

My shower is on and so is the tub what should I do.

Shower diverter [ 3 Answers ]

I replaced the shower diverter and seat due the shower and tub running at the same time and I still have the same problem. I have taken out the diverter numerous times and don't see anything wrong with it. ANy help would be appreciated. Oh, it is a sasco valve with a separate hot, cold and diverter...

View more questions Search