Ask Experts Questions for FREE Help !
Ask
    gapicker's Avatar
    gapicker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2009, 05:13 PM
    Kenmore elite washer how to take lid off
    How do I disassemble a kenmore elite washer, it is leaking water and I must get the top off to repair it
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 26, 2009, 03:44 PM
    There are two push clips between the top and the cabinet. Push in a lift. A putty knife works well for this application
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore Elite washer f3 [ 4 Answers ]

I have a Kenmore Elite washer, it's a top loader. It flashes an F3 error code, What does that mean?

Kenmore Elite Washer [ 1 Answers ]

My kenmore elite washing machine has a problem that I'm trying to get resolved. Yesterday I was able to load clothes in the machine and fill it with water but when I closed the door for the machine to start washing it didn't start. I had to keep opening and closing the door and then finally it...

Kenmore Elite HE3 Washer [ 3 Answers ]

During the "Add a garment/Wash" cycle I'm getting an F followed by an H (or reverse) code. No numbers, just "F" and "H". The washer will not move past this till I pause it then restart it and it usually goes away. Today I had to do this twice to clear the code. This has happened 3 times over the...

Kenmore Elite washer [ 3 Answers ]

I have a Kenmore Elite sensor smart 3-speed automatic washer with catalyst that is about 7 years old. Over the weekend, it stopped draining and spinning. If I start a new cycle, it fills with water but gets stuck at the drain and spin cycle of the load with a clikcing sound. I checked the drain...

View more questions Search